Charge Bluetooth Headset At low battery level, Headset will produce a series of five rapid high tones at an interval of 20 seconds. Red light will turn off when the device is fully charged. It takes about 2 hours. Warning: Never dispose of the battery into fire to avoid explosion. Do not over-charge the battery.Over-charge will shorten the battery life. Power on Your Headset Press and hold the Multi-function button for around 5 seconds until the blue LED flashes. Power off Your Headset Press and hold the Multi-function button for about 5 seconds until the red LED turns on for 1 second and then turns off. Pair Headset with Mobile Phone 1. Place the headset and phone together. When the headset is in OFF mode, press & hold the multi-function button (about 8 seconds) until the blue light turns on steadily & the headset is in pairing mode. 2. Search Bluetooth devices in your mobile phone menu until the product is found. 3. Select “BT-11” & press “enter” in mobile phone menu. 4. Input password “0000” to pair the headset with the phone. The headset blue light will flash after pairing is successful. 5. Press “connect” in mobile phone to establish connection. Pair Additional Devices Your headset can pair up to eight devices. If more than 8 devices have been paired, the first device will be removed when a new device is added. The headset will establish connection with the last paired device only upon powering up. If you want to connect the headset to another device in the paired device list, you must initiate the connection from that device, which will become the “last connected” device. Volume Control Press the volume up key repeatedly to increase speaker volume until desired volume level is reached. Press volume down key repeatedly to decrease speaker volume until desired volume level is reached. How to Wear Headset 1. Wear the headset on your ear. 2. You can adjust the position of the hook so that the headset will attach to your ear firmly & comfortably. Headset Functions The headset supports both hands-free and headset modes. However, some functions are determined by the mobile phone. Please refer to your mobile phone user instruction.
Function
Phone Mode
Headset Mode
Headset Operation
Enter Pairing Mode
On
Off
Press the Multi-function key (about 8 seconds)until the blue light turns steadily on.
Voice Dialing Calls
Standby
On
Press the Multi-function key once, and then speak the command.
Redial last number
On -- Voice dialing on /off
On--（standby）
Press the Multi-function key for 2seconds.
End a call
Answering call
On
Press the Multi-function key once.
Receive a call
Ringing
On
Press the Multi-function key once.
Reject a call
Ringing
On
Hold the Multi-function key.
LED Indicator During battery charging
Headset Indicator
Status
Red light on
Charging in progress
Red light off
Charging is completed
In normal operation
Headset Blue LED Indicator
Headset Status
Off
Power off
Blue light shines steadily after flashing
In pairing mode
Fast blinking 3 times
Pairing completed
Flashes at 3-second interval ( 0.1 second ON and 2.9 seconds OFF)
Standby
Blue light flashes at 8-second interval (2 seconds ON and 6 seconds OFF)
Connected
Note：The headset will be turned offto save powerif it is not connected to a phone for 30 minutes.
Audio Indicator
Audio Tone
Headset Status
Single high tone when pressing volume button
Volume maximum or minimum is reached
Five rapid high tones, repeated every 20 seconds
Low battery
No audio indications, deteriorating communication quality
Out of range
Ring tone
Incoming call
Single high tone
Pairing confirmation
Single low tone
Initiating voice activation
No tone
Power ON/OFF
Troubleshooting If the headset cannot establish connection with mobile phone, please check: - Make sure the Bluetooth headset has been paired with the phone & it is in the paired device list. - The Bluetooth function in phone is activated. - The distance between the phone and Bluetooth headset within 10 meters & there is no obstacle between the two devices. - If the Bluetooth headset still cannot establish connection, delete it from the paired device list, then repeat the pairing process again.
Any information contained on this website shall be the copyright of BNM. No person shall publish it without the prior consent of BNM. website: http://www.bnmcompany.com Email: info@bnmcompany.com